Grenade User Manual

NOTE: WEAR GOGGLE ALL THE TIME
Step1: Use a stick to push the "fire button" (Primer.) If you hear a "click" sound, it means the valve is in the off status. Remove the stick, the "button" should go back to the critical position.
Step2: Refill your Grenade by gas cylinder showed as above (head down) If there is a leaking, please repeat Step 01. NOTE: Our product is designed for low pressure use. If you use high pressure gas, it may cause leaking and damage the O-ring. If you observe the constant leaking. Please contact the retailer and replace the O-ring. (Not free service)
Step3:  Load 0.68" paintball (4 shots max.) into chambers. NOTE: Remember to wear goggle during the whole process. After you lead the paintballs, please restore the grenade carefully and avoid the impact or it will cause damages.

Step 04 : Load your grenade into your grenade launcher. Remember, don't use your finger to push the "fire button" or it will fire immediately and cause damages.

Important Notice:
  1. This grenade is only for Airsoft, paintballs. Unauthorized modified will cause damage.
  2. You "MUST" refill the gas to check if there is a leaking first and then load the paintballs. If not, the leaking gas may fire the bullets and cause damages.
  3. Our product is designed for low pressure use. If you use high pressure gas, it may cause leaking and damage the O-ring.
  4. Modify is not allowed. If you find problems with your grenade, consult with your local dealers.
  5. Maintenance: Please use silicon oil to lubricate the components frequently.
  6. Only replace with the original factory parts in order to ensure the quality and safety